Basic must/juice tools.

Winemaking Talk - Winemaking Forum

Help Support Winemaking Talk - Winemaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

codeman

Senior Member
Joined
Aug 10, 2014
Messages
298
Reaction score
35
What are some basic tools one would need to test a must or juice?

Refractometer for measuring brix or sugar content.

Ph55 meter for measuring PH.

What else?
 
A hydrometer and test jar for measuring specific gravity during fermentation. Can't use a refractometer once fermentation starts.

Acid and SO2 test kits or meter

A wine thief for samples
 
That kit comes with a nice syringe, some NaOH, a nice plastic sample cup container and some indicator which you don't need if your using a ph meter. All for like $11 If you have a pH meter you can use the syringe, cup and NaOH.
 
A hydrometer and test jar for measuring specific gravity during fermentation. Can't use a refractometer once fermentation starts.



Acid and SO2 test kits or meter



A wine thief for samples


Why can't you use a refractometer after fermentation starts?


Sent from my iPhone using Wine Making
 
I only use a light refractometer when selecting grapes to purchase. To the grape grower, it is also important to decide when to harvest. Other than those two cases, the device stays in it's case.

For must, this is the list of what I have found to be the best to have on hand..

- Acid test kit, extra test tubes and syringes come in real handy!
- test tube rack is rather handy
- HYDROMETER! A must have
- digital scale A must have
- yeast nutrient - have a good supply in stock
- tartaric acid - have a good supply in stock
- a Punch down tool
- a sieve is handy (strain your samples before testing)
- beakers are handy (500ml are great for holding samples)
- a Wine thief is very handy!
- PH meter & a good supply of calibration solutions/storage solution
 
Why can't you use a refractometer after fermentation starts?

Because the ethanol also changes the index of refraction. So the reported Brix will not be accurate.

There is a way to compensate for this, provided you took an initial reading before fermentation commenced. There is a table or spreadsheet that allows you to reinterpret the current refractometer reading into current Brix. Here is a page that will get you started: http://valleyvintner.com/Refrac_Hydro/Refract_Hydro.htm
 
Because the ethanol also changes the index of refraction. So the reported Brix will not be accurate.

There is a way to compensate for this, provided you took an initial reading before fermentation commenced. There is a table or spreadsheet that allows you to reinterpret the current refractometer reading into current Brix. Here is a page that will get you started: http://valleyvintner.com/Refrac_Hydro/Refract_Hydro.htm


With the formula why can't you use it after fermentation starts?



Sent from my iPhone using Wine Making
 

Latest posts

Back
Top