I didn't have a press other than my hands, so I don't think I got all the color out of the skins that others might.
I don't want to depress you, but squeezing by hand leaves probably 1/3 of the wine behind. Last fall I performed a "medium" press with a basket press (no way to measure, my guess is 3/4 bar) on 576 lbs of grapes, producing 40+ gallons of wine. I added 15 gallons water to the pomace to make a 2nd run, and when I pressed hard, I got 20 gallons of wine. My first pressing left 1/8 of the wine behind.
Fall 2019 I purchased a used #40 basket press using Facebook Marketplace. Normally these are $600+ USD, but I got a really good deal, including 54 and 25 liter demijohns + a few toys + junk I threw out. I'd like a bladder press, but the ones I've looked at are out of my price range.
The #40's basket is 16" wide, 20" high, with an 18.5 gallon capacity. In 2019 I made three 5 lug batches (180 lbs each), but in 2020 I changed to four 4 lug batches (144 lbs each) as that is more manageable for me when I'm alone. The press handled 5 lugs at once with no problem, and it would probably hold 7. I like this size as the opening at the top is large enough to easily pour the must in, so I wouldn't want a smaller one.
Note: This puppy weighs over 150 lbs, so I take it apart to move it, and the base is still heavy.
I'm telling you this, as it will help you determine what press you need if you buy one. You'll have to search for the capacity of other basket press sizes, as "#30" isn't exactly descriptive ...
One piece of advice: DO NOT BUY CHINESE. My experiences with Chinese manufactured hardware of all types has been extremely poor, and the reviews I've read on wine making equipment have been equally poor.
More advice -- don't buy too small, as you'll end up suffering with it, or selling it and buying a bigger press. I suggest that you read the descriptions and use a tape measure to help visualize how big the press actually is.
If a manufactured press is out of consideration, consider building a press. There are many types of homemade presses that do at least do a better job than pressing with your hands. Anything that will multiply your strength is good.
Note: my press is low to the ground so I constructed a base using the wood from the palettes the grapes arrived on. I took 4 palettes, ripped them apart, selected the best wood, and built a base (+ used an old 2x4 I had hanging around). Pictures of the assembled base
are here. I didn't have room to store it inside, so it remained outside for a year -- after the 2020 pressing I junked it, as it had degraded. But no problem -- I learned a lot from building it, and the 2021 grapes will arrive on more palettes. The new one will be built a bit lower, so that the spout clears my tallest bucket by 6", plus I'll glue all joints in addition to the screws.