Paint

[JohnT]

Ok,

Just getting used to a Flat Forehead from banging it against a wall.

I have a crusher that is about 17 years old. It is getting pockets of rust and now needs a little refinishing. The area of rust is inside the hopper where the most contact occurs with the grapes.

I have read about a food grade, two part epoxy paint that comes in spray cans, but i'll be darned if I can find it for sale anywhere..

What is your folk's experience with refinishing metal equipment? any paint recomendations would be greatly appriciated!

 

[DirtyDawg10]

They do make an epoxy spray paint that is usually marketed for refinishing metal appliances. I used it on an old dryer that had some ugly rust spots on it and it worked great. I wouldn't trust it to be food grade though.

I think I've seen a post on here about someone that sells a food grade epoxy paint though. Hopefully they will chime in.

 

[wyntheef]

would the repair paint for a stovetop be food grade?

 

[Rocky]

JohnT, have you considered powder metal coating the piece? It is a much more durable finish than paint and is food safe. You should be able to find that service in NJ.

 

[grapeman]

I believe Dan-Runningwolf- had posted a year ago that Presque Isle carries the spray epoxy for finishing food grade winery equipment. Look for a post by him on that or check their site out.

 

[The_Wine_Gnat]

One option you might consider is calling a couple of local wineries and asking them what do they do. I advise calling several as everyone has their own peculiar methods and you will be able to choose the one that works for you. Personally, I am very curious what you decide to do and the pros/cons of your options. Keep us posted!

 

[JohnT]

JohnT, have you considered powder metal coating the piece? It is a much more durable finish than paint and is food safe. You should be able to find that service in NJ.

Ya know, I have considered that. I would like to get both the crusher and (especially) the pan from my hydrolic press coated.

I just figured that this would be expensive.

 

[Rocky]

JohnT, it is more expensive than paint. I used to restore antique cars and I used powder metal when ever I could for durability, e.g. frames. The number of colors and finishes available is extensive. It does cost but it lasts and you only have to do it once.

 

[JohnT]

Found a place only 10 miles away. Sent a picture and he will let me know a ballpark cost.

 

[Runningwolf]

John, Presque Isle does sell the paint for Wine Equipment.