The problem with the "Big Cake" is that if there is fruit in that cake it's not staying wet and releasing the sugar and flavors it has. It's more likely to spoil there as well. I stir my wine must daily until a day or two before I expect to rack it to a carboy. That last day or two allows the heavier lees to fall out as much as possible. In this hobby seeing the side view might be interesting but it can also be counter productive if you leave a container like the one in the left photo above. that's a pretty thick layer and if that is your fruit, it needs to be pushed down into the must at least daily until fermentation is just about over.
Today I have some blackberries that have been floating the entire time of the ferment and getting pushed down each day. Today I will use a stainless steel strainer to scoop them out and press out any juice in them. Base on yesterdays SG reading of .998 the finish line is in sight so racking to a carboy is probably a day or two away. Yesterday things got a last light stir so that the bentonite on the bottom of the bucket wasn't disturbed
Certainly you can proceed how you want and your result may be great, but for the majority folks, a bucket is a better option in the variety of ways I and others have mentioned. I've only been doing this about 5 1/2 years but I have tried to listen to those on here with many years of experience. Sometimes ways can be improved and other times the reasons things are done a certain way proves to be safer, easier and result in a better quality wine with fewer risks. Note for one last example that your carboy on the right above have very little space for any foam so if you shake or agitate your wine, you have to have a solid cap on that container or foam is going to spew out. Your wide mouth bubbler is much better but again has less volume to hold in foam before it corrupts the liquid in an airlock. While capped with a non-breathing cover all the CO2 is staying trapped in you wine prolonging the degassing time. In a bucket the CO2 readily gasses out and when I move to a carboy my degassing time is almost always less than 1 month.
Here's hoping for your success in wine making.
Enter your email address to join: