To start, you need some kind of a fermenting bucket. Size depends on how big of a batch you are attempting to make. It has to be bigger than the batch so all of the ingredients will fit in it. If you are using grapes, first step is get em off the stems, then break the skins. Catch all the juice and place in the fermenting bucket. (We refer to the bucket as the primary.) I have not made many grape wines so my method is not necessairly the correct one. Anyway, if you want to use wild yeast, you just throw the grapes and juice in the primary. If you can, check the acid and ph. You will have to check the specific gravity which is what you use the hydrometer for. It will tell you about how much alcohol by volume you will wind up with in your wine. It also lets you know how the ferment is coming along. You put some of the juice in a tall skinny jar or test tube and see what the hydrometer reads when it floats in the wine or juice. If not letting it ferment on its own, you should put campden tabs (same as k-meta powder) in the must (the juice and skins you are making wine from.) Let it sit for 12 hrs, and add pectic enzime (helps break down the fruit and aids in clearing later) wait 12 more hours and pitch the yeast. I forgot to add if your brix is not high enough (measured with the hydrometer) you will need to add some sugar to bring it up so you get the alcohol content you want. Let it ferment for a few days in the primary with a towel over the top to keep dirt and bugs out. Mite need to set a lid on top of the towel if you have a cat . It will form a cap on top of the must, you should punch that down a couple times a day or so. I also put the fruit in a ferment bag, something to hold the fruit in, but let the juice out. A paint strainer bag from a paint store works good for this. After 5 or 6 days or so, pull the fruit out and squeeze the juice out of it. Best is to press it, but if you don't have a press, squeezing will work. Now let it sit til the specific gravity gets down to 1.010 or so and transfer to the secondary. this is just a large glass container that you can put a bung in and a airlock. The airlock keeps the air out but lets the co2 made while fermenting out of the wine. Let it finish fermenting and then it will be time to rack off the lees. (the gunk that has fallen out while fermenting. ) It should be in a carboy of some kind, topped up towards the neck so there is not a lot of surface exposed to the air. Up in the neck, but down a couple of inches or so from the bottom of the bung. Now you wait for it to clear. It can be tasted at this time, it will probably have a yeasty, maybe bitter young taste. When you get close to this stage, ask some more and we will give you some more advise. This was for a red wine, if making a white, i believe you press the grapes after crushing and just use the juice, then do the fermenting thing. Good luck with it, hope I didn't make this too confusing, Arne.