Headspace

Winemaking Talk - Winemaking Forum

Help Support Winemaking Talk - Winemaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Paulie vino

Senior Member
Joined
May 4, 2022
Messages
101
Reaction score
74
Location
Long Island, NY
The last 2 vintages were my first with grapes and I had some oxidation issues so this year I want to improve. After primary I pressed into carboys with a few inches of headspace to account for any unexpected volume increase and left for 4 days. I racked again and the picture below is the result. That headspace looks good right? Thanks
 

Attachments

  • PXL_20241006_214014703.MP.jpg
    PXL_20241006_214014703.MP.jpg
    3.1 MB
The last 2 vintages were my first with grapes and I had some oxidation issues so this year I want to improve. After primary I pressed into carboys with a few inches of headspace to account for any unexpected volume increase and left for 4 days. I racked again and the picture below is the result. That headspace looks good right? Thanks
Looks good to me. Are you using Kmeta. It helps prevent oxidation.
 
I did not add any at crush or this racking to allow for a natural mlf (if it happens). Plan to add kmeta in 6 weeks or so and then every 3 months until bottling.
 
I did not add any at crush or this racking to allow for a natural mlf (if it happens). Plan to add kmeta in 6 weeks or so and then every 3 months until bottling.

Indigenous yeast/MLB work because they have been essentially “cultivated” into the local ecology over decades/centuries. I would not be surprised to hear of failures from any native fermentation outside of Bordeaux/Tuscany/Napa/ etc. I would not consider Long Island in that category.

Remember that commercial yeasts were isolated from wild populations, the same for MLB. You would probably have more success, as well as reliability and repeatability, by selecting a commercial yeast for your wine style and tastes.
 
I used avante yeast for the primary fermentation. Previous years I've used ch16 for malolactic fermentation but this year I decided to forego it and see what happens. I had a hard time sourcing it locally and didn't want to pay $30 for MLB plus shipping costs.
 
Back
Top