Brigitte
Junior Member
- Joined
- Feb 6, 2014
- Messages
- 288
- Reaction score
- 80
I could use some advice. We had a pickup truck load of watermelons given to us a while back. Good quality melons. Seeded. We scooped the flesh and seeds out and froze in zip lock bags until the weather was cooler and we had time to mess with them. We had 70 one-gallon freezer bags. Pressed with a bladder press and have around 34-40 gallons of juice. To this we added 40 pounds of sliced frozen strawberries (Sam’s). The pulp of the melon left over in the press was bagged in mesh bags and is floating in the tank— 2 bags about 1 gallon each. K- meta added at 1/4 tsp per five gallons. This was all done yesterday. The juice is cold bc the melon had been frozen. Temp is 60 at present. Ok so today I’m running some numbers to get ready to adjust the juice before adding yeast.
So here is what I have:
SG. 1.040
Brix 9.7
pH 4.94. Ugh
TA 1.7 g/l. (0.17%). Double ugh.
The SG/Brix of course can be fixed easy enough. We aren’t interested in pushing the ABV high and I know the juice wouldn’t do well with that. I’m thinking 9-10% ABV. Doable.
But that pH and TA?!!!???
I have not run any calculations on acid addition. Has anyone ever dealt with a pH so high and TA so low and ended with a desirable wine? I have acid blend and tartaric acid both. I have tannin.
What would you do?
Thanks !!
Brigitte
So here is what I have:
SG. 1.040
Brix 9.7
pH 4.94. Ugh
TA 1.7 g/l. (0.17%). Double ugh.
The SG/Brix of course can be fixed easy enough. We aren’t interested in pushing the ABV high and I know the juice wouldn’t do well with that. I’m thinking 9-10% ABV. Doable.
But that pH and TA?!!!???
I have not run any calculations on acid addition. Has anyone ever dealt with a pH so high and TA so low and ended with a desirable wine? I have acid blend and tartaric acid both. I have tannin.
What would you do?
Thanks !!
Brigitte