Wine Clearing Issue

Winemaking Talk - Winemaking Forum

Help Support Winemaking Talk - Winemaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

IronWine

Junior
Joined
Dec 10, 2014
Messages
10
Reaction score
1
I'm hoping that my wine is not done for or something worse. I started a Watermelon-Peach Wine back in mid-September. Fermented, degased, but it will not clear, even remotely. The S.G is at .990, and I have tried degassing twice, Bentonite, Pectic Enzyme (twice, second time double dose I read somewhere), Super-Kleer, and Sparkolloid (twice). I also have filtered the wine with a Buon Vino #2 pad, and it still hasn't cleared. I have not backsweetened yet.

I'm 1.) Worried it's something worse 2.) It's never going to clear 3.) It's going to see the street gutter.

I attached a picture of what it looks like currently.

Thoughts? Help? Ideas? Thanks in advance for any or all help!
IMG_0090.jpg
 
It looks like you need to leave it alone, honestly.

See how it seems like a gradient, lighter at the top and darker/murkier at the bottom? That's it, trying to clear. If you let it sit you'll notice to top, lighter portion will start to grow it's way down the carboy as the darker coloration seems to compact, which is exactly what it's doing.

I'm guessing, hoping, that you racked after giving every clearing agent it's chance to work, and I'm guessing between those rackings and your degassing, that you've finally managed to coax out enough CO2 for it to finally clear. If you take a sample out, put it in a bottle and shake the bottle with your thumb over the opening.. If it 'pops' when you take your thumb off, it's still gassy..

What temp has it been stored at? Anything less than 70-75F and you'll really have to work to get all the CO2 out. I'm betting it's colder than that.

It's a patience thing.. The three P's; makes me wish Tom were around more to preach it like he did when I first found WMT lol

Welcome to WMT.
 
It doesn't pop when i do the bottle test. Do you think if I put a bottle warmer on it, it may help?
 
It doesn't pop when i do the bottle test. Do you think if I put a bottle warmer on it, it may help?

70 F from a eHow article...

Clearing Pectin Haze

1 Remove 1 cup of clouded wine for each gallon of wine affected by pectin haze and place into a large, glass container.

2 Add 1 tsp. of pectic enzyme to the container and stir thoroughly until dissolved.

3 Place the glass container of treated wine in a place where a temperature of 70 to 80 degrees Fahrenheit is maintained. Cover the container lightly with plastic wrap.

4 Stir the treated solution once each hour for a total of four hours.

5 Strain the treated solution through clean, unused muslin cloth back into the untreated, main wine container.

6 Let the treated wine sit, undisturbed, at a temperature of 70 F for four to five days. The haziness should dissipate by the end of this time.
 
If you have the wine stored in a cool area, that can interfere with clearing. Move it to a warmer area and see if that doesn't help.
 
I have a bottle warmer, right now I have it in the furnace/laundry room next to the dryer. I will put the warmer on it.
 
Yes, I agree that it should not be too warm. Just having it in the room with the furnace will be warm enough.
 
IMO all the clearing stuff you've added could affect the flavor. Bentonite can make it taste like dirt, filters will actually filter flavor. Degassing? Simply rack it every 2-3 months, and let it age for 9-12 months. Don't warm it, leave it age at 60-65 degrees. Have you tasted it? If it will tasted fine with a bit of sweetener, don't throw it away, just drink it. Some fruits and meads just won't clear!
 
IMO all the clearing stuff you've added could affect the flavor. Bentonite can make it taste like dirt, filters will actually filter flavor. Degassing? Simply rack it every 2-3 months, and let it age for 9-12 months. Don't warm it, leave it age at 60-65 degrees. Have you tasted it? If it will tasted fine with a bit of sweetener, don't throw it away, just drink it. Some fruits and meads just won't clear!

I have not tasted it. I'm probably the only person on the forum that enjoys making it, but never drinks it. I do it for my fiance and friends, but out of the five or so I've made, never tried them!

I have not sweetened the wine yet, I didn't want to sweeten until it was clear.
 
Don't throw it out!

Give it some time for the sediment to settle. Then rack off the sediment. I will often splash the wine when I rack as well. Once you are off the lees, degas some more. Then I would give it more time.

May take a time or two of that to clear and degass it.

Anytime I have a white wine not clearing it has been gas.

Heather
 
I really think that my issue is gas. I took a test tube sample out tonight after I racked some Shiraz, and after I shook it it had a slight pop after removing my hand, and a small head came to the top. I let it sit for a few minutes and noticed micro-bubbles going to the surface, slowly. Can I still degas, and how do I really know I've got all the gas out? I use a power drill with a wand, last two degasing I did for 45min.
 
Hey everyone. I know it's been about 3 months since I last posted in this thread, but my wine still looks like the picture above. Any new thoughts, or anything I could try to help speed up the clearing? It's not done really anything since. I started this wine in September! Any help is greatly appreciated!
 
You seem to have added plenty clearing agents. Personally, I think I'd degass again, sulfite and let sit again. I know you've degassed several times but that CO2 can be stubborn. Hope others chime in:)
 
1/4 teaspoon potassium metabisulfite aka Kmeta... teaspoon NOT tablespoon. I made that mistake once:-/
 
If you've got the cash the all in one wine pump does a good job degassing... I've been very pleased with the performance of Steve's product.
 

Latest posts

Back
Top