VinesnBines
Senior Member
- Joined
- Feb 5, 2020
- Messages
- 1,463
- Reaction score
- 1,920
(Deleted)
You leave buds on last year's (one year old) wood. The blue cuts are on the older wood (cordon). While the older wood will push buds, the productive buds are on the one year wood.
You had what was basically a very good question, so I edited my post accordingly.I re-thought my post
Maybe look at my playlist on taming a neglected vineyard:
https://www.youtube.com/channel/UCB1DU0r0xtmFMKaF-rLBL9A/playlists
Such as:
Ask me questions if you have any.
Handy Andy needs to do major surgery on those vines.
The fella in your video was spur pruning to two buds, I think! He didnt say much.
Do stubs produce fruiting vines in the same year
Ive been watching a few videos, and note some practice vine pruning, selecting a couple of last years vines with approx 8 to 12 buds, to give fruit this year. Then choosing another couple of last years vines to be spurs to produce next years fruiting vines. I suspect the old fella that I bought this place from used both methods, had his own methods.
I have both 2 and 3 wires in my vineyards. The Verdelho (red) is on a three wire system, my Alverino (whites) is on a two wire system. The Trellis's are very rustic, I might reassemble them, with something a bit more solid, to stop them falling down.
The fella is me. And don't say much because I am the verecund vigneron...
Yes. But as mentioned above, more fruit on last year's canes than from buds on older wood.
Selecting 8 to 12 buds is known as cane pruning. With that one often does what is known as cane and sub (one leaves one stub of two buds for next year's canes and a cane with 8 to 15 buds for this year's fruit). A different method than stub pruning. But cane pruning requires a good stout bottom wire to tie the canes to. Mostly I do cane and stub pruning when there is a good stout trellis (the videos were of a vineyard without this), except with varietals that have very stiff canes, and those I cordon stub prune always.
Here is a blog post I did many years ago on cane and stub pruning:
https://stcoemgen.com/2012/03/11/trimmin-them-vines/
Quite frankly, I find that cordon are better on loose wire systems. If you can update your wire (and you may also need to update your end posts to sustain the tight wire), then cane sub and pruning is to consider.
the first step is to identify how old the wood is, what I would call canes have the fruit producing bud,,, the older wood is where I look to rejuvenate an arm (cordon) with an eye to “if I clip at this bud to produce a young cane, next spring I will prune that cane for fruit and prune back more ugly older wood.”Switching from spur to cane is doable but takes some work.
Hi,
I would like to recommend this video series. It's long, it's slow but it kinda sinks in and gives a full picture.
Looks like a very nice patch and with a little renewal of the wines it will probably give you a bigger crop in a couple of years.
Good luck and enjoy!
I agree with @balatonwine, if you want to correct the errors of the past do as balatonwine instructed. If you are looking for a crop next year, my recommendation will result in more fruit next season.Personally, I find those cuts too high. For one thing, the vertical trellis design is too short for such high cuts. And the second reason is in a neglected vineyard, I would prune more radically to bring it back into a proper pruning format, even if one gets a smaller crop that year, it will pay dividends for years afterwards.
Zooming in on your picture, for example, shows buds circled in blue. I would rather cut on the blue line.
View attachment 69938
Painfully slow....
But was good info. Not many videos that you can play back at 1.5 times the normal speed and still be able to understand.
1.5 speed was a little fast. 1.25 was pretty good but still a little slow. Normal speed is difficult to watch.
I watched a TV program last night on Spanish wine making. What caught my eye was the way the vineyards had been pruned. All the vines were free standing and the trunks looked very old and short. There were no wires or cordons in site!
When I froze some of the close ups of the vines, I could see they had been spur pruned, with mostly 4 spurs from each trunk. The vines appeared to be separated by approx 4 to 6 feet (1.2 to 1.8m) and the clusters appeared to be low down on the vines, and not buried in foliage.
Is it normal to remove the upper clusters on fee standing vines and remove foliage from around the grape clusters????
What are the pros and cons of the different types of pruning???? (soil type, climate, mechanization, vine density, disease control, altitude, labor, variety, anything else)
The Sultan of Sap, (there are lots of ways toHandy Andy, look up Marco Simonit. He's practically leading a revolution in the pruning world. Basically, the bush vine training method according to his philosophy works best considering that every vine grows its own way. It's all about letting the vine move the sap within itself in the most un-constricted way. I'm finally getting my own vines this week and I'm going to go with this method (the old world Spanish method). I'm getting a certified Tempranillo clone from Spain. (I am incredibly happy about this)
Marco Simonit. He's practically leading a revolution in the pruning world.
Honestly, to me he is not.
I have two degrees. In ecology and resource management. Nothing he advocates is new to me. He took some decades to learn this? I learned it in just a few course as an undergraduate.
...
Enter your email address to join: