Sauvignon Blanc -- oak or not?

Winemaking Talk - Winemaking Forum

Help Support Winemaking Talk - Winemaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

winemaker81

wine dabbler
Staff member
Super Moderator
Supporting Member
Joined
Nov 5, 2006
Messages
11,385
Reaction score
33,282
Location
Raleigh, NC, USA
I made an impulse purchase of 7 gallons of Lanza Sauvignon Blanc juice, which is currently nearing the end of fermentation. It will be bulk aged in a pair of 3 gallon glass carboys.

Oak or not oak? I'm debating if I want to oak the wine, and if so, what oak to use.

One option is to add 1 oz medium toast French oak cubes to one carboy and leave the other unoaked.

I welcome opinions on this.
 
I made an impulse purchase of 7 gallons of Lanza Sauvignon Blanc juice, which is currently nearing the end of fermentation. It will be bulk aged in a pair of 3 gallon glass carboys.

Oak or not oak? I'm debating if I want to oak the wine, and if so, what oak to use.

One option is to add 1 oz medium toast French oak cubes to one carboy and leave the other unoaked.

I welcome opinions on this.
I typically don't oak Sauvignon Blanc.
 
It's not typically oaked (although, isn't a Fume Blanc just a Sauv Blanc that has oak in it?). 1oz is a pretty small amount and may be just enough to make a difference, but not be perceived necessarily as an oak addition. I might be tempted to try your split approach, were it my wine.
 
Wouldn
I made an impulse purchase of 7 gallons of Lanza Sauvignon Blanc juice, which is currently nearing the end of fermentation. It will be bulk aged in a pair of 3 gallon glass carboys.

Oak or not oak? I'm debating if I want to oak the wine, and if so, what oak to use.

One option is to add 1 oz medium toast French oak cubes to one carboy and leave the other unoaked.

I welcome opinions on this.
Does't this simply depend on whether or not you like oak taste in SB? I personally hate it but you may like it. When it comes to things like oak my philosophy is don't add it unless you have a good reason, because you can't take it back :)
 
1oz is a pretty small amount and may be just enough to make a difference, but not be perceived necessarily as an oak addition.
The recommendation is 2 oz cubes in a 5 gallon carboy, so 1 oz in a 3 gallon is just a bit less. If it's not enough, I can add more.

Robert Mondavi created "Fume Blanc" to avoid negative connotations with Sauvignon Blanc at the time. He oaked it to make it distinctive, but I've read that not all Fume is oaked.

I haven't had an oaked SB in years, maybe more than a decade. No reason for it, just didn't buy any. So ... it appears I need to purchase a few examples of both and taste test. Not that I'm feeling unhappy about that ....

My curiosity regarding what others do spurred this post. I don't have to make a decision for a while, so I'm mulling things over ... leaning strongly towards a carboy of each.

If this works out well, I'll plan to buy again next year.
 
Fermentation ended (SG 0.998) so it's racking time. I added 4 tsp bentonite dissolved in 2 cups hot water, and moved the wine into a 25 liter demijohn. The final intention is to move to a pair of 3 gallon carboys, but for clearing it's easier to use the demijohn. If I leave it in the demijohn I'll need to top it with half a bottle of commercial.

Note: The recommendation for bentonite is 1 to 2 Tbsp per gallon -- I added 4 tsp for ~6.5 gallons. The clearing you see if after 15 minutes in the demijohn.

This makes me question if the recommended amount of bentonite is really necessary? Possibly it's for protein and tannin removal, but not clearing. Since my interest is clearing, this works for me.

sauvignon-blanc.jpg

EDIT: The solid layer of foam reduced yesterday and dropped to almost nothing this morning. That, coupled with the SG, indicated fermentation was either done or really close. The SG reading was not 100% accurate -- given the situation I didn't degas the wine before taking the reading. I want the original and final SG to be accurate -- everything in between is more-or-less a barometer. Given how fast the wine is clearing indicates my guesstimate was correct.
 
Last edited:
BTW, the owner of my local shop recommended Lalvin QA23, so I took his advice. The lees compacted VERY tightly, which meant I got very little sediment when racking. I don't fuss much about sediment at the first racking as it's going to drop out anyway, but the compactness in this situation is nice.
 
I racked yesterday, moving the wine into a pair of 3 gallon carboys. It would take an additional 2 bottles to fill the demijohn, so I had to move it.

At this point the oak/no-oak is up in the air. We are going to buy a couple of bottles each of oaked & unoaked Sauvignon Blanc and taste test.
 
The only place that I've ever seen "oaked" SB is California, and it's less common than it used to be. Anything from New Zealand or France will not be oaky, so that's a safe bet, but won't taste much like California SB, which is less intense than either.

If I remember correctly, things labelled "fumé blanc" are generally oaked. I get the impression that winemakers in CA add oak to SB when it doesn't have much else going on. It's easy to over-oak a white wine, so some of the examples I've encountered have been pretty oaky. None of them did I like -I feel like oak and SB don't go well together, but of course it's all a matter of what you like! I'm someone who can't comprehend why people grow chardonnay in California, and even less why people drink it, so I'm clearly an outlier :)
 
@AaronSC, I thought Fume Blanc was oaked as well. According to this article in Forbes, Mondavi didn't originally oak his Fume Blanc. I remember Fume as being oaked, that was late 80's - mid 90's, which appears to fit the article's mention that he didn't oak it for 2 decades.

IMO SB can be oaked, but it need to be lightly done, and it needs to be the right ones. I like New Zealand SB, but the big grassy flavor would be hurt (IMO) by oak.
 
If you can get good Light Toast American Oak, I'd go for it. The coconut hints from the Light Toast could be wonderful in a SB.
I Oaked 12L of Magnotta (winery/juice supplier in Toronto) Sauvignon Blanc: Used 15g of Nevers Oak chips. Not enough - I should have done 30g.
The downside is that some of the fruit notes would be subdued by the oak. Maybe a tough choice.
 
I'm into experimentation. My original plan was to produce a 1st run and 2nd run Bordeaux blend using 50% Merlot, 25% Zinfandel, and 25% Vinifera Blend (Cab Sav, Cab Franc, Merlot, Petit Verdot). Ferment in 4 batches and blended post-fermentation. Really simple, right?

I REALLY complicated things as I'm ensuring I have at least a gallon of each varietal to use for later comparison. Plus my current barrel is 2/3 Merlot, 1/3 Vinifera blend, and the second barrel (which I purchase next week) will have 40% Merlot, 40% Zinfandel, 20% Vinifera blend.

The 3 carboys of 2nd run will have different oaks -- American, French, & Hungarian. I'm testing Next Level Oak's winestix and providing Mike (owner) with my unvarnished results.

Yeah, I'm my own worst enemy with regard to complicating things through experimentation.

Besides all of the above, the Sauvignon Blanc was not on the agenda until a guy backed out on the barrel purchase. The decision to purchase was made the night before the grapes arrived. 😂
 
I tasted the Sauvignon Blanc last night and am leaning towards no oak. It's good, as-is, and I am not confident that oak will improve it.

I keep in mind something I was told some years back: The enemy of "good" is not "bad"; the enemy is "better".

I've heard it "Never let great get in the way of the good."

As someone with 20 gallons of maturing Sauvignon Blanc, my vote is definitely no oak. Even at a month old it tastes fantastic and I can't see an improvement with oak. But then I'm kind of oak leary too due to a difficult experience in 2018!

I could see an experiment if you had 25 gallons and wanted to oak 5 that's reasonable. But the risk of ruining half your vintage is too much.

ANd over the years, I've had a bunch of the Mondavi Fume Blanc. Never detected oak and thought it was basically a marketing scheme that succeeded. And I still like it today. I just think there are others that are better in the same price range.
 
I could see an experiment if you had 25 gallons and wanted to oak 5 that's reasonable. But the risk of ruining half your vintage is too much.
Yup. We have 6 gallons, and this is split with my son, so I get 15 bottles. If this turns out like I expect, I'm going to purchase 12 gallons of juice next year so I get 2 carboys out of it.
 
Oak is interesting.

A barrel broker around here says he owes his kids college funds to Robert Parker and laments the current trend of less oak, including in SB’s & chards.

In the wine business, there is romance and then there is reality. Wineries need to show off their new barrels to visitors, but clobbering everything with new oak is unnecessary and wasteful. The micro ox & flavoring purpose of new barrels can be achieved with neutral barrels and staves, chips, bags or liquid. No need to buy a $1,000 barrel as a flavoring agent. Neutral barrels around here are basically free.
 

Latest posts

Back
Top