- Joined
- Nov 23, 2019
- Messages
- 478
- Reaction score
- 728
Maybe not the sharpest tools in the shed, we decided to attempt to make Brunello from grapes. We understand that this is foolhardy. So much so that we expect to dump all of it down the drain sometime in the next thirty six or so months.
The Plan:
Purchase the best Sangiovese we can. In this case, Lanza-Musto from CFP Winemakers in Pittsburgh. Three lugs at thirty six pounds each. The pH was 3.63 and the Brix was 23.8. No acid adjustments were made. However, we bumped the sugar to 26. Probably should have bumped it a degree or two higher. Sugar was dissolved into juice for this addition.
Crushed. Added 30ppm sulfite in distilled water solution to the fermenters.
Other additions include pectic enzyme, Opti-Red, and some Stavin Oak beans. The yeast is Renassaince Avante. The starter was made up in a one liter Erlenmeyer beaker with Go Ferm Protect in warm distilled water. The yeast and a pinch of sugar was added to start. After the yeast began to hydrate, juice was added in stages to bring the temp down. The starter was allowed to go for twenty four hours before pitching.
The must was allowed to cold soak for three days. Late on the third day native fermentation began. The Avante was pitched and took over in twelve hours. Fermaid O was added at the same time.
After a week we added unhydrated CH-16 malolactic bacteria straight to the fermenter. Also dosed with Acti-ML in distilled water.
The second dose of Fermaid O was added between one third and one half of the sugar gone.
It appears that fermentation has slowed. I will run labs in the morning.
Here's the foolish part: We plan to do extended maceration for fifty days after the end of alcoholic fermentation. The question is not whether or not this is a good plan. We already know it isn't The question is how to do it. I've read about people shrink wrapping a Brute, punching down daily, and reapplying shrink wrap. I've heard of people using a VCT and planting the lid on top and letting it go for the duration. There are a few other schemes that just don't appear to be practical. Nor do they appear to be smart winemaking.
Has anyone done this successfully? Or even, less than successful?
The Plan:
Purchase the best Sangiovese we can. In this case, Lanza-Musto from CFP Winemakers in Pittsburgh. Three lugs at thirty six pounds each. The pH was 3.63 and the Brix was 23.8. No acid adjustments were made. However, we bumped the sugar to 26. Probably should have bumped it a degree or two higher. Sugar was dissolved into juice for this addition.
Crushed. Added 30ppm sulfite in distilled water solution to the fermenters.
Other additions include pectic enzyme, Opti-Red, and some Stavin Oak beans. The yeast is Renassaince Avante. The starter was made up in a one liter Erlenmeyer beaker with Go Ferm Protect in warm distilled water. The yeast and a pinch of sugar was added to start. After the yeast began to hydrate, juice was added in stages to bring the temp down. The starter was allowed to go for twenty four hours before pitching.
The must was allowed to cold soak for three days. Late on the third day native fermentation began. The Avante was pitched and took over in twelve hours. Fermaid O was added at the same time.
After a week we added unhydrated CH-16 malolactic bacteria straight to the fermenter. Also dosed with Acti-ML in distilled water.
The second dose of Fermaid O was added between one third and one half of the sugar gone.
It appears that fermentation has slowed. I will run labs in the morning.
Here's the foolish part: We plan to do extended maceration for fifty days after the end of alcoholic fermentation. The question is not whether or not this is a good plan. We already know it isn't The question is how to do it. I've read about people shrink wrapping a Brute, punching down daily, and reapplying shrink wrap. I've heard of people using a VCT and planting the lid on top and letting it go for the duration. There are a few other schemes that just don't appear to be practical. Nor do they appear to be smart winemaking.
Has anyone done this successfully? Or even, less than successful?